-
All Categories
- Hytorc
- Milwaukee
- InnoTorc Tork Anahtarları
- Euroboor
- Stahlwerk
- Ahşap İşleme Makinaları
- Solar Enerji Sistemleri
- Ossa Tork Anahtarları
- Buhar Jeneratörleri
- Elektrik Jeneratörü
- Çamaşırhane Makineleri
- MVF fanlar
Centrifugal double inlet fans
CENTRIFUGAL DOUBLE INLET FANS
This series is used in restaurants, factories, kitchens,( exhaust hoods) etc.
Low pressure centrifugal fans, with double inlet and forward curved blades impelle, dynamically balanced. Belt driven (NT, RTC, RTCE) and direct driven (DA/CBM), made of galvanized sheet steel.
Motors:
Single phase 230V- 50Hz 4/6 poles IP20 or IP44 ,one speed or three speed
Three phase 230/400V -50Hz 4/6/8 poles
Related products
-
Singlephase and three-phase asynchronous electric motors
Single-phase:
Motors size 56 to 100, 2 and 4 poles. Standard motors, high starting torque with circuit breaker and high starting torque without circuit breaker.
-
Low pressure axial fans are suitable for the transportation of big volume of air and are used for the aspiration of air and smokes, both in industry and civil environments.
-
Axial-ROOF fan with light alloy die-cast impeller with wing-profile blades – Fibreglass roof – Base for securing toP the roof
EVT V = 7.000÷36.000 m3/h Pt = 6÷40 kg/m2
Use: suitable for the suctin of vitiated air flue gases and vapour from the environment.They are very useful during the summer season in those environments where air changes are necessary in order to keep the room ventilated. They are also used for the aeration of workshops, founderies, cement factories, tanneries, joineries, and for chemical mechanical and metallurgical industries where big air volumes have to be sucked at low pressure. Minimum working temperature – 20 °C, maximum + 60 °C.
-
The low profile of the MIXVENT-TD fans makes them the most effective solution for installations where the space of installation is limited such as false ceilings.
Easy to mount.
TD-MIXVENT
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (till 800 model) or with metal casing steel finished in a tough epoxy-polyester paint coating (for models 1000 to 6000).
The unique design of the support bracket allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting.
