Steam Generators

The liquid gas fuel steam generator of the Flash Series offers comfortable and high-efficiency combustion performance with low counter pressure values. With its 3-pass design, the flame smoke contacts the entire combustion surface, making the most efficient use of the combustion surface. It is more durable than generators with its coiled design. Heat loss is prevented thanks to strong insulation with glass wool, stone wool, and ceramic.

Grim Series solid fuel Scotch type steam boiler can burn granular fuels such as lignite coal, pomace, pellets, sunflower husk, hazelnut shell, etc. with high efficiency, and its use is facilitated by automatic loading. If requested, an economizer can be added to the flue gas outlet to take advantage of the heat of the smoke gases. The economizer to be mounted on the back of the boiler allows the condensate water entering the boiler to be heated and returned to the boiler. Thus, fuel savings are achieved.

The hybrid series solid fuel steam boiler, is created by combining lignite coal, pomace, pellets, chips, sunflower husk, hazelnut shell etc. granule water tube and flame smoke tube boiler types in the same body to form a HYBRID Boiler. The water tube primary furnace mounted on the rotary grate or stoker is manufactured at the necessary height as a result of detailed and precise calculations, creating a large combustion chamber on the rotary grate. The flame smoke tube Scotch type boiler is connected to the radiation heat collector tubes.

The Mega Volt Series electric steam generator operates in 2-3-4-5-6 stages, depending on its capacity, and works fully automatically. It produces as much steam as you need. The steam is consistent. Therefore, it is not affected by sudden steam draws. Heating resistors are not damaged in sudden needs. Thanks to its steam coupling with a special separator, it is possible to obtain steam purified from water. It has been designed considering all potential adverse conditions and is equipped with exceptional safety chains. Thus, there is no need for a separate operator. It is shipped with all its fittings.

Counter pressure steam boiler, thanks to its high heating surface area, provides the opportunity to obtain drier and higher energy steam. In order to produce steam in a short time, the water volume is kept as small as possible, and the steam volume is kept large. In counter pressure steam boilers, the flame is separated from the boiler with 2 passes. The flame hitting the back wall comes back towards the front cover and leaves the boiler through the pipes by turning back from the front wall covered with refractory material.

Shield Series liquid-gas fueled steam boiler offers comfortable and highly efficient combustion performance with low counter-pressure values. With its 3-pass design, it ensures that the flame and smoke come into contact with the entire combustion surface, maximizing the use of the combustion surface. Strong insulation with glass wool, rock wool, and ceramics prevents heat loss.

Shield Series, 3-pass steam generator with fire smoke tube offers comfortable and highly efficient combustion performance with low back pressure values. With its 3-pass design, the combustion surface is used in the most efficient way by ensuring that the flame smoke contacts the entire combustion surface. Heat loss is prevented thanks to strong insulation with glass wool, rock wool and ceramic.

The Strong Series liquid gas fuel steam boiler, offers comfortable and high-efficiency combustion performance with low counter pressure values. With its 3-pass design, the flame smoke contacts the entire combustion surface, using the combustion surface in the most efficient way. Heat loss has been prevented thanks to strong insulation with glass wool, stone wool, and ceramics.

The Thunderbolt Series solid fuel steam boiler provides high performance in intense and continuous working conditions and sudden steam draws thanks to its wide water and steam volume. It offers the opportunity to obtain drier and higher energy steam thanks to its high heating surface. It offers comfortable and high-efficiency combustion performance with low counter pressure values. Thanks to its 3-pass design, it distributes the heat obtained evenly to all surfaces, providing maximum heat transfer and fuel savings.

In our Volcano Series solid fuel front furnace steam boilers, in order to provide a sufficient heat transfer area for solid fuel combustion, they are designed by adding a front furnace made of a water tube bundle in front of a traditional 3-pass Scotch type smoke/flame tube steam boiler. Our boilers are designed for a minimum of 4,500 kcal/h (flame temperature 1200 C°) based on the fuel. Please contact our company to burn lower calorie fuel.

Electric and automatic steam generator, available steam production from 15 to 60 kW. Water feed can be connected directly to the water mains or to a condensate tank. D01 is supplied with two separate sets of heating elements for single or double operation. Steam working pressure is between 0.5 to 7 bar.

Options

• Stainless steel condensate recovery and water feed tank (83 l)
• Boiler body in stainless steel AISI 304
• All components in contact with water in stainless steel AISI 304

• Available with one or two steam outlets
• Automatic water feeding by means of a water pump
• Automatic water level control
• Two safety devices fitted on the boiler: pressure switch and safety valve
• Condensate return inlet

Options
• Water pump
• Water feeding tank
• Steam gun
• Steam-air gunTechnical Specifications SUPER
Voltage 230V/400V/3/50-60 Hz
Steam working pressure 2,8 bar
Boiler heater 3,3 – 3,9 – 4,8 kW
Iron heater 0,830 kW
Boiler capacity 4,9 l
Water inlet 3/8”
Boiler exhaust 3/8”
Overall dimensions 390 x 550 x 1000 mm
Net weight 52 Kg
Gross weight (carton pallet) 61 Kg
Packing dimensions 680 x 480 x 1170 mm

Automatic electric hot steam-generator | compact pre-installed system on the frame.
The compact system includes the steam generator, the water treatment set, electric switchbox and all pipe & electric connections. All is preinstalled on the stainless steel frame. Ready to plug and use.

Automatic electric hot steam-generator / steam pressure from 2 to 6 bar

• – with capacity up to 100 kW (up to 150 kg of hot steam per hour) – if returned condensate is reused
• – with capacity up to 100 kW (up to 130 kg of hot steam per hour) – if condensate is not reused

Water feed can be connected directly to the water mains or to a condensate tank. Regulation of the working steam pressure is adjustable in range from 1 to 4.5 bar.

This steam-generator is available with four independent heaters (four independent heating elements). The steam-generator shell is manufactured in accordance to the current PED regulations.

Recommended usage :

• Heating the wort brew machines – recomended for brewhouses with maximal usage volume 1500 liters per one brew
• Heating the water, beverages or chemical solutions in the water tanks, CIP stations, boilers, pasteurisers etc.
• Heating the food processing machines
• Sterilization of the vessels, pipes, hoses, stainless steel kegs, filters, food production equipment, pharmacy equipment … with hot steam

The Storm Series liquid-gas fuel steam boiler provides high performance in intense and continuous working conditions and sudden steam withdrawals thanks to its large water and steam volume. It allows the possibility to obtain drier and higher energy steam due to its high heating surface. It offers comfortable and high-efficiency combustion performance with low counter pressure values.