Showing all 4 results

  • Electric and automatic steam generator, available steam production from 15 to 60 kW. Water feed can be connected directly to the water mains or to a condensate tank. D01 is supplied with two separate sets of heating elements for single or double operation. Steam working pressure is between 0.5 to 7 bar.


    • Stainless steel condensate recovery and water feed tank (83 l)
    • Boiler body in stainless steel AISI 304
    • All components in contact with water in stainless steel AISI 304
    • Available with one or two steam outlets
    • Automatic water feeding by means of a water pump
    • Automatic water level control
    • Two safety devices fitted on the boiler: pressure switch and safety valve
    • Condensate return inlet

     Water pump
     Water feeding tank
     Steam gun
     Steam-air gunTechnical Specifications SUPER
    Voltage 230V/400V/3/50-60 Hz
    Steam working pressure 2,8 bar
    Boiler heater 3,3 – 3,9 – 4,8 kW
    Iron heater 0,830 kW
    Boiler capacity 4,9 l
    Water inlet 3/8”
    Boiler exhaust 3/8”
    Overall dimensions 390 x 550 x 1000 mm
    Net weight 52 Kg
    Gross weight (carton pallet) 61 Kg
    Packing dimensions 680 x 480 x 1170 mm

  • Automatic electric hot steam-generator | compact pre-installed system on the frame.
    The compact system includes the steam generator, the water treatment set, electric switchbox and all pipe & electric connections. All is preinstalled on the stainless steel frame. Ready to plug and use.

    Automatic electric hot steam-generator / steam pressure from 2 to 6 bar

    • – with capacity up to 100 kW (up to 150 kg of hot steam per hour) – if returned condensate is reused
    • – with capacity up to 100 kW (up to 130 kg of hot steam per hour) – if condensate is not reused

    Water feed can be connected directly to the water mains or to a condensate tank. Regulation of the working steam pressure is adjustable in range from 1 to 4.5 bar.

    This steam-generator is available with four independent heaters (four independent heating elements). The steam-generator shell is manufactured in accordance to the current PED regulations.

    Recommended usage :

    • Heating the wort brew machines – recomended for brewhouses with maximal usage volume 1500 liters per one brew
    • Heating the water, beverages or chemical solutions in the water tanks, CIP stations, boilers, pasteurisers etc.
    • Heating the food processing machines
    • Sterilization of the vessels, pipes, hoses, stainless steel kegs, filters, food production equipment, pharmacy equipment … with hot steam
  • Electrical Steam Generators:
    In applications where electric power is more economically available than fossil fuels, or where fossil fuel combustion and the handling of combustion by-products are unacceptable, electrical steam generators offer a viable alternative.

    Steamon manufactures a complete line of electric steam generator from 10 kW to 500 kW up to 6 bars for heating and process applications. Custom units are also available up to 10 bars.

    Steamon’s vertical design is a fully packaged steam generator produce to CE and TSE specifications and applicable standards and codes. They are very efficient because the heating elements are totally immersed in water and the pressure vessel is fully insulated. Radiation losses are minimal. With a carefully calculated heat-to-steam ratio, operating pressures are achieved quickly with maximum efficiency.

    Steamon Electrical steam generators have no wasted fuel going out the stack as associated with fossil fuels; therefore, electrical steam generators are environmentally friendly. No NOx (nitrogen oxides) are being transmitted to the atmosphere.