Showing 33–48 of 116 results
Rotary burrs set, teeth double cut, head diameter 10 millimeter, shaft diameter 6 millimeter.
1 x RB.B1006, 1 x RB.C1006, 1 x RB.F1006, 1 x RB.G1006, 1 x RB.L1006. Packed in plastic case.
RBS.0150
Uni/Double cut: Ideal for: cast iron, uncured steel, low-alloy steel, stainless steel, brass, bronze/copper.
This 5-piece set includes:
– RB.B1006
Burr type B (cylindrical model with end cut) toothing universal, dimensions head Ø x L = 10 x 20 mm, shaft Ø6 mm, total length 65 mm
– RB.C1006
Burr type C (cylindrical model with rounded head) toothing universal, dimensions head Ø x L = 10 x 20 mm, axle Ø6 mm, total length 65 mm
– RB.F1006
Burr type F (tree shape) toothing universal, dimensions head Ø x L = 10 x 20 mm, shaft Ø6 mm, total length 65 mm
– RB.G1006
Burr type G (tree model with pointed end) toothing universal, dimensions head Ø x L = 10 x 20 mm, shaft Ø6 mm, total length 65 mm
– RB.L1006
Burr type L (cone model with rounded head) toothing universal, dimensions head Ø x L = 10 x 25 mm, shaft Ø6 mm, total length 70 mm
Hex socket and insert bits torque wrench is designed to tighten and loosen bolts with used of standardized hex sockets and dedicated adapters (insert bits). Key components of wrenches are made of a lightweight alloy based on aluminum and titanium compounds whilst the ratchet and driving units are manufactured with use of “ultra steel” that makes them as sturdy and durable as titanium pieces. The wrenches collaborate with hydraulic power packs (800 bar) that can be powered by an electric motor or a compressed air drive. The power pack is remotely controlled by means of a dedicated remote control unit. Operation in the fully automatic mode is as option. Bolts are tightened with the controlled torque up to the required limit, which is achieved by setting a specific oil pressure on a connected manometer, where the pressure corresponds to the desired torque. The torque values and associated oil pressures can be found on the table of torques that is attached to each wrench. Hydraulic wrench – principle of collaboration with applicable hex sockets and Allen pins. For the full range of sockets and pins please refer to the relevant directory.
Hex socket and insert bits torque wrench is designed to tighten and loosen bolts with used of standardized hex sockets and dedicated adapters (insert bits). Key components of wrenches are made of a lightweight alloy based on aluminium and titanium compounds whilst the ratchet and driving units are manufactured with use of “ultra steel” that makes them as sturdy and durable as titanium pieces.
The wrenches collaborate with hydraulic power packs (800 bar) that can be powered by an electric motor or a compressed air drive. The power pack is remotely controlled by means of a dedicated remote control unit. Operation in the fully automatic mode is as option. Bolts are tightened with the controlled torque up to the required limit, which is achieved by setting a specific oil pressure on a connected manometer, where the pressure corresponds to the desired torque. The torque values and associated oil pressures can be found on the table of torques that is attached to each wrench. Hydraulic wrench – principle of collaboration with applicable hex sockets and Allen pins. For the full range of sockets and pins please refer to the relevant directory.
On the contrary to hydraulic torque wrenches the hydraulic bolt tensioners enable initial tensioning of bolts/studs without application any torque since the tensioning force is applied in line with the central line of the bolt/stud usually towards the expanding direction. Therefore the pre-tensioning force of bolts is independent on the friction coefficient. The bolt tensioners are actuated by means of a hand pump or electric pump or pneumatic pump with the output pressure of 800 or 1600 bars depending on the unit version. Optional and customized designs of the bolts tensioners with various values of pre-tensioning force, size and application procedures are available upon individual orders.
– Parallel shank with 3 flats – Fits all common drill chucks
Specifications:
• Max. material thickness for drilling in steel: approximately 20 mm (13/16″)
• Max. material thickness for drilling in stainless steel: approximately 10 mm (3/8″)
• Max. material thickness for drilling in aluminium: approximately 20 mm (13/16″)
When it comes to picking a good gear puller, the most important factor is good quality. Strength and durability are extremely important. EGA MASTER produces its gear puller range with high performance drop forged steel, under strict mechanical tests, exceeding the requirements of the most demanding international standards. The drive screw is made out of cold rolled steel, so it is much more tolerant to stress.
Once safety is preserved, the other important task is getting the exact precise tool. EGA MASTER offers a very wide range that assures having the proper tool in each application: external, internal, 3 jaws, 2 jaws, short, standard, long or extra long reach, with all variety of spreads.
When it comes to picking a good gear puller, the most important factor is good quality. Strength and durability are extremely important. EGA MASTER produces its gear puller range with high performance drop forged steel, under strict mechanical tests, exceeding the requirements of the most demanding international standards. The drive screw is made out of cold rolled steel, so it is much more tolerant to stress.
Once safety is preserved, the other important task is getting the exact precise tool. EGA MASTER offers a very wide range that assures having the proper tool in each application: external, internal, 3 jaws, 2 jaws, short, standard, long or extra long reach, with all variety of spreads.
When it comes to picking a good gear puller, the most important factor is good quality. Strength and durability are extremely important. EGA MASTER produces its gear puller range with high performance drop forged steel, under strict mechanical tests, exceeding the requirements of the most demanding international standards. The drive screw is made out of cold rolled steel, so it is much more tolerant to stress.
Once safety is preserved, the other important task is getting the exact precise tool. EGA MASTER offers a very wide range that assures having the proper tool in each application: external, internal, 3 jaws, 2 jaws, short, standard, long or extra long reach, with all variety of spreads.
When it comes to picking a good gear puller, the most important factor is good quality. Strength and durability are extremely important. EGA MASTER produces its gear puller range with high performance drop forged steel, under strict mechanical tests, exceeding the requirements of the most demanding international standards. The drive screw is made out of cold rolled steel, so it is much more tolerant to stress.
Once safety is preserved, the other important task is getting the exact precise tool. EGA MASTER offers a very wide range that assures having the proper tool in each application: external, internal, 3 jaws, 2 jaws, short, standard, long or extra long reach, with all variety of spreads.
When it comes to picking a good gear puller, the most important factor is good quality. Strength and durability are extremely important. EGA MASTER produces its gear puller range with high performance drop forged steel, under strict mechanical tests, exceeding the requirements of the most demanding international standards. The drive screw is made out of cold rolled steel, so it is much more tolerant to stress.
Once safety is preserved, the other important task is getting the exact precise tool. EGA MASTER offers a very wide range that assures having the proper tool in each application: external, internal, 3 jaws, 2 jaws, short, standard, long or extra long reach, with all variety of spreads.
Showing 33–48 of 116 results
Cookie | Duration | Description |
---|---|---|
cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |