Açıklama
MD SERIES – double stage- single impeller
Compact Execution MOR
TS SERIES – single stage -double impeller
Compact Execution MOR
TD SERIES – double stage – double impeller
Compact Execution MOR
Atex CAT 2G and 3GD Certifications
Power & Hand Tools
-
All Categories
- Milwaukee
- InnoTorc Tork Anahtarları
- Euroboor
- Stahlwerk
- Ahşap İşleme Makinaları
- Solar Enerji Sistemleri
- Ossa Tork Anahtarları
- Buhar Jeneratörleri
- Elektrik Jeneratörü
- Çamaşırhane Makineleri
- MVF fanlar
- Hytorc
SIDE CHANNEL BLOWERS
Use: to move air and technical gases, including methane/biogas, in compression and vacuum systems.
Available solutions:
MS SERIES – single stage – single impeller
Compact Execution MOR
Capacity up to 1022 m³/hr (50Hz) / 1234 m³/hr (60Hz)
Max. differential pressure: 500 mbar
Ambient temperature from -15 to +40°C
Two-pole electric motors, insulation class F – Tropicalised and IP55 protection
Singlephase or threephase (Bimetallic thermal protector PTO S01 150°C)
Related products
-
ATEX ELECTRIC MOTORS
Designed to respect the service conditions in the dangerous environments as per ATEX normative, offering safety and reliability.
Certificate for 1G 2G 21D 22D Zones:
CEII2G Ex db IIC T5-T3 Gb
CEII3G Ex ec IIC T4 Gc
CEII2D Ex tb IIIC T125° Db
CEII3D Ex tc IIIC T125 °C Dc
-
LOW pressure centrifugal fan – Impeller with blades curved forward – Directly coupled motor
BP V=180 ÷ 20.100 m3/h Pt = 15 ÷ 220 kg/m2
Use: for the removal of clean or slightly dusty air.
They have high efficiency and reduced noise level, the fans of this series are largely used, inventilation, conditioning, drying, cooling, mechnical draft, and toxic gas elimination plants. The temperature of the fluid transported must not exceed 80°C without cooling fan and 150° C with cooling fan. For higher temperatures it is necessary to modify the construction of the fan.
-
Axial-ROOF fan with light alloy die-cast impeller with wing-profile blades – Fibreglass roof – Base for securing toP the roof
EVT V = 7.000÷36.000 m3/h Pt = 6÷40 kg/m2
Use: suitable for the suctin of vitiated air flue gases and vapour from the environment.They are very useful during the summer season in those environments where air changes are necessary in order to keep the room ventilated. They are also used for the aeration of workshops, founderies, cement factories, tanneries, joineries, and for chemical mechanical and metallurgical industries where big air volumes have to be sucked at low pressure. Minimum working temperature – 20 °C, maximum + 60 °C.
-
Low pressure axial fans are suitable for the transportation of big volume of air and are used for the aspiration of air and smokes, both in industry and civil environments.
