Описание
MD SERIES – double stage- single impeller
Compact Execution MOR
TS SERIES – single stage -double impeller
Compact Execution MOR
TD SERIES – double stage – double impeller
Compact Execution MOR
Atex CAT 2G and 3GD Certifications
Power & Hand Tools
-
All Categories
- Генератори
- Парогенератор
- Перални Машини
- MVF вентилатори
- Hytorc
- Innotorc Динамометричен Ключ
- Stahlwerk
- Euroboor
- Дървообработващи машини
- Milwaukee
- Системи За Слънчева Енергия
- Ossa Динамометричен Ключ
SIDE CHANNEL BLOWERS
Use: to move air and technical gases, including methane/biogas, in compression and vacuum systems.
Available solutions:
MS SERIES – single stage – single impeller
Compact Execution MOR
Capacity up to 1022 m³/hr (50Hz) / 1234 m³/hr (60Hz)
Max. differential pressure: 500 mbar
Ambient temperature from -15 to +40°C
Two-pole electric motors, insulation class F – Tropicalised and IP55 protection
Singlephase or threephase (Bimetallic thermal protector PTO S01 150°C)
Related products
-
Low pressure axial fans are suitable for the transportation of big volume of air and are used for the aspiration of air and smokes, both in industry and civil environments.
-
MEDIUM PRESSURE CENTRIFUGAL FAN – HIGT EFFICIENTLY AND LOW NOISE RESERVE BLADE IMPELLER – DIRECTLY COUPLED MOTOR
EU V =380 ÷ 70.000 m3/h Pt = 45 ÷ 550 kg/m2
Use: for sucking in very dusty air containing various types of materials in suspension.
The main feature of these types of fans is the association of high output (deriving from the use of a rotor with reversed blades, special profile), with the suction of dusty fluids or those containing granular materials.
Besides these fans are characterized by a very flat curve of the absorbed power, in order not to overload the motor neither when working with open inlets.They are assembled in joineries for transporting saw dust and wooden shavigs, excluding filamentaus material, in mechanical industries for sucking in metal chips, in pneumatic transport of the cement factories, ceramic factories, mills, fodder factories, tanneries, founderies, in textil and chemical Industries and in general in all those apllications where it is necessary to transport harmful air with low and medium pressure.
-
Axial-ROOF fan with light alloy die-cast impeller with wing-profile blades – Fibreglass roof – Base for securing toP the roof
EVT V = 7.000÷36.000 m3/h Pt = 6÷40 kg/m2
Use: suitable for the suctin of vitiated air flue gases and vapour from the environment.They are very useful during the summer season in those environments where air changes are necessary in order to keep the room ventilated. They are also used for the aeration of workshops, founderies, cement factories, tanneries, joineries, and for chemical mechanical and metallurgical industries where big air volumes have to be sucked at low pressure. Minimum working temperature – 20 °C, maximum + 60 °C.
-
AP series
Centrifugal high-pressure fan – DirecT DRIVEN
APE V= 120 ÷ 2.100 m3/h Pt = 190 ÷ 1.475 kg/m2
APF V= 600 ÷ 8.400 m3/h Pt = 430 ÷ 1.760 kg/m2
APG V= 960 ÷ 21.300 m3/h Pt = 390 ÷ 1.865 kg/m2
