-
All Categories
- Euroboor
- Milwaukee
- Electrical Generator
- InnoTorc Torque Wrenches
- Stahlwerk
- Woodworking Machinery
- MVF Fans
- Solar Energy Systems
- Ossa Torque Wrenches
- EgaMaster Power Hand Tools
- Steam Generators
- Industrial Laundry Machines
Centrifugal double inlet fans
CENTRIFUGAL DOUBLE INLET FANS
This series is used in restaurants, factories, kitchens,( exhaust hoods) etc.
Low pressure centrifugal fans, with double inlet and forward curved blades impelle, dynamically balanced. Belt driven (NT, RTC, RTCE) and direct driven (DA/CBM), made of galvanized sheet steel.
Motors:
Single phase 230V- 50Hz 4/6 poles IP20 or IP44 ,one speed or three speed
Three phase 230/400V -50Hz 4/6/8 poles
Related products
-
ATEX ELECTRIC MOTORS
Designed to respect the service conditions in the dangerous environments as per ATEX normative, offering safety and reliability.
Certificate for 1G 2G 21D 22D Zones:
CEII2G Ex db IIC T5-T3 Gb
CEII3G Ex ec IIC T4 Gc
CEII2D Ex tb IIIC T125° Db
CEII3D Ex tc IIIC T125 °C Dc
-
Industrial corrosion resistant POLYPROPYLENE centrifugal fanS
VSA SERIES — HIGH PRESSURE
VSA V =250 ÷ 18.000 m3/h Pt = 27 ÷ 330 kg/m2
VSA series is used in chemistries and pharma industries, and in plants that use corrosive substance; highly resistant to chemical agents, especially organic solvents. Manufactured entirely from corrosive resistant material ensuring any surface that may come into contact with the corrosive fume has no metallic components.
Produced completely by injection moulding (up to VSA30); by welding up to VSA70.
Polypropylene housing resistant to UV rays and adjustable to 8 positions.
-
Axial-ROOF fan with light alloy die-cast impeller with wing-profile blades – Fibreglass roof – Base for securing toP the roof
EVT V = 7.000÷36.000 m3/h Pt = 6÷40 kg/m2
Use: suitable for the suctin of vitiated air flue gases and vapour from the environment.They are very useful during the summer season in those environments where air changes are necessary in order to keep the room ventilated. They are also used for the aeration of workshops, founderies, cement factories, tanneries, joineries, and for chemical mechanical and metallurgical industries where big air volumes have to be sucked at low pressure. Minimum working temperature – 20 °C, maximum + 60 °C.
-
AP series
Centrifugal high-pressure fan – DirecT DRIVEN
APE V= 120 ÷ 2.100 m3/h Pt = 190 ÷ 1.475 kg/m2
APF V= 600 ÷ 8.400 m3/h Pt = 430 ÷ 1.760 kg/m2
APG V= 960 ÷ 21.300 m3/h Pt = 390 ÷ 1.865 kg/m2
