-
All Categories
- Euroboor
- Milwaukee
- Electrical Generator
- InnoTorc Torque Wrenches
- Stahlwerk
- Woodworking Machinery
- MVF Fans
- Solar Energy Systems
- Ossa Torque Wrenches
- EgaMaster Power Hand Tools
- Steam Generators
- Industrial Laundry Machines
-
- Engine: RICARDO
- Engine Model : K4100-ZD
- Stand By kVA: 44
- Stand By kW : 35,2
- Prime kVA: 40
- Prime kW : 32
- Rated Current : 57,6
-
Grim Series solid fuel Scotch type steam boiler can burn granular fuels such as lignite coal, pomace, pellets, sunflower husk, hazelnut shell, etc. with high efficiency, and its use is facilitated by automatic loading. If requested, an economizer can be added to the flue gas outlet to take advantage of the heat of the smoke gases. The economizer to be mounted on the back of the boiler allows the condensate water entering the boiler to be heated and returned to the boiler. Thus, fuel savings are achieved.
-
The planetary transmission gear also referred to as the ‘torque multiplier’ of ‘amplifier” is a simple tool designed to tighten and undo bolts and nuts, in particular the ones of large sizes. Bolts or nuts can be tightened to the torque of e.g. 1000 Nm (100 kGm) with the force of merely two fingers. The wrench (transmission gear) has a protective component, so called safety stud that is sheared when the applied force may be possibly too high. It prevents the transmission teeth from damage and makes the device sturdy and reliable. To tighten a bolt with controllable torque the operator has to attach a torque wrench with the setting range up to 400 Nm to the input (driving) bit with the square ½” (¾”) cross-section size. The required setting value for the input torque is to be read from a table that accompanies each transmission gear. It is the value that has to be set on the torque wrench. The desired torque is reached when a click is heard during tightening. Obviously, a handle with a ratchet is used to undo the bolt or nut, which enables quick detachment of the connection without the need to disengage the handle.
-
Cutter kit. 2 x HCS.140, 2 x HCS.180, 2 x HCS.220, 1 x IBC.70. Packed in plastic case.
Our HCS.KIT contains High Speed Steel Annular Cutters which feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. Euroboor HSS annular cutters are equipped with high precision Weldon shanks*. The HCS.KIT is a 6 piece HSS cutter set with DoC 30 mm. The set comes with one pilot pin. Besides HSS cutter sets with metric sizes, we also over HSS cutter sets with imperial sizes. And both six and ten piece HSS cutter sets.
*On request we also provide our sets with double shank design (Nitto/Weldon).
-
AP series
Centrifugal high-pressure fan – DirecT DRIVEN
APE V= 120 ÷ 2.100 m3/h Pt = 190 ÷ 1.475 kg/m2
APF V= 600 ÷ 8.400 m3/h Pt = 430 ÷ 1.760 kg/m2
APG V= 960 ÷ 21.300 m3/h Pt = 390 ÷ 1.865 kg/m2
-
Annular cutter, HSS, depth of cut 30 mm.
Annular cutter, material HSS (high speed steel), depth of cut 30 millimeter.High Speed Steel Annular Cutters with a drill depth of 30 mm feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life.These HSS annular cutters – 30 mm can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form.HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance.The rest material created with the use of these annular cutters is the signature Euroboor slug.The rim on this slug is exactly what prevents our HSS annular cutters – 30 mm from penetrating the second layer of material.
-
The hybrid series solid fuel steam boiler, is created by combining lignite coal, pomace, pellets, chips, sunflower husk, hazelnut shell etc. granule water tube and flame smoke tube boiler types in the same body to form a HYBRID Boiler. The water tube primary furnace mounted on the rotary grate or stoker is manufactured at the necessary height as a result of detailed and precise calculations, creating a large combustion chamber on the rotary grate. The flame smoke tube Scotch type boiler is connected to the radiation heat collector tubes.
-
Designed for collaboration with all types of hydraulic torque wrenches. The protection index for the units is IP54 and the maximum working pressure may reach up to 800 bars.
-
OSSA Machinery Works offers a new hydraulic pumps designed to supply hydraulic bolt tensioners. The power pack offers unsurpassed technical parameters and enables very fast operation with a wide range of pre-tensioning devices.
Operation of the remote control device (RCD):
a) ON/OFF button to switch the electric motor on and off
b) depressing the button 1: pressure is supplied to advance the piston of the pre-tensioning unit until the already preset pressure is reached,
c) releasing of the button 1: pressure is kept constant, the piston remains in the advanced position. The motor remains off.
d) depressing the button 2: the unit is depressurized, the piston of the pre-tensioning unit is retracted to its initial position (lowered)
-
Pilot pin, outside diameter 8 millimeter, length 122 millimeter.
-
Cutting oil, contents (liquid) 500 milliliter.
Mild steel lubricating and cooling cutting oil spray 500 ml.
Our Euroboor IBO-P.911 is a lubricating and cooling cutting oil spray suitable for mild steel.This cutting spray is highly versatile in use and ideal for tool preparation.
-
The low profile of the MIXVENT-TD fans makes them the most effective solution for installations where the space of installation is limited such as false ceilings.
Easy to mount.
TD-MIXVENT
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (till 800 model) or with metal casing steel finished in a tough epoxy-polyester paint coating (for models 1000 to 6000).
The unique design of the support bracket allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting. -
Low clearance hydraulic torque wrenches are made up of a main device, i.e. the drive unit and various adapter size (related to hex size).
Casings of these devices are made of lightweight alloy based on aluminium and titanium compounds whilst the ratchet and driving units are manufactured with use of ‘ultra steel’ that makes them as sturdy and durable as titanium pieces.
Hydraulic socket wrenches with adapters are perfectly suitable to tightening and loosening bolts on flange connections – it is why they are also called as hydraulic wrenches with adjustable torque for flanges.
The wrenches collaborate with hydraulic power packs (800 bar) that can be powered by an electric motor or a compressed air drive. The power pack is remotely controlled by means of a dedicated remote control unit. Operation in the fully automatic mode is as option.
Bolts are tightened with the controlled torque up to the required limit, which is achieved by setting a specific oil pressure on a connected manometer, where the pressure corresponds to the desired torque. The torque values and associated oil pressures can be found on the table of torques that is attached to each wrench.
-
LOW pressure centrifugal fan – Impeller with blades curved forward – Directly coupled motor
BP V=180 ÷ 20.100 m3/h Pt = 15 ÷ 220 kg/m2
Use: for the removal of clean or slightly dusty air.
They have high efficiency and reduced noise level, the fans of this series are largely used, inventilation, conditioning, drying, cooling, mechnical draft, and toxic gas elimination plants. The temperature of the fluid transported must not exceed 80°C without cooling fan and 150° C with cooling fan. For higher temperatures it is necessary to modify the construction of the fan.
-
MEDIUM PRESSURE CENTRIFUGAL FAN – HIGT EFFICIENTLY AND LOW NOISE RESERVE BLADE IMPELLER – DIRECTLY COUPLED MOTOR
EU V =380 ÷ 70.000 m3/h Pt = 45 ÷ 550 kg/m2
Use: for sucking in very dusty air containing various types of materials in suspension.
The main feature of these types of fans is the association of high output (deriving from the use of a rotor with reversed blades, special profile), with the suction of dusty fluids or those containing granular materials.
Besides these fans are characterized by a very flat curve of the absorbed power, in order not to overload the motor neither when working with open inlets.They are assembled in joineries for transporting saw dust and wooden shavigs, excluding filamentaus material, in mechanical industries for sucking in metal chips, in pneumatic transport of the cement factories, ceramic factories, mills, fodder factories, tanneries, founderies, in textil and chemical Industries and in general in all those apllications where it is necessary to transport harmful air with low and medium pressure.
-
The Mega Volt Series electric steam generator operates in 2-3-4-5-6 stages, depending on its capacity, and works fully automatically. It produces as much steam as you need. The steam is consistent. Therefore, it is not affected by sudden steam draws. Heating resistors are not damaged in sudden needs. Thanks to its steam coupling with a special separator, it is possible to obtain steam purified from water. It has been designed considering all potential adverse conditions and is equipped with exceptional safety chains. Thus, there is no need for a separate operator. It is shipped with all its fittings.
Showing 33–48 of 143 results
