Descriere
MD SERIES – double stage- single impeller
Compact Execution MOR
TS SERIES – single stage -double impeller
Compact Execution MOR
TD SERIES – double stage – double impeller
Compact Execution MOR
Atex CAT 2G and 3GD Certifications
Power & Hand Tools
-
All Categories
- Spalatorie Industriala
- Generator Electric
- MVF Ventilatoare
- InnoTorc Chei Dinamometrice (Torque)
- Stahlwerk
- Ossa Chei Dinamometrice (Torque)
- Sisteme şi Panouri Solare
- Euroboor
- Utilajelor pentru Prelucrarea Lemnului
- Generatoare De Abur
- Milwaukee
SIDE CHANNEL BLOWERS
Use: to move air and technical gases, including methane/biogas, in compression and vacuum systems.
Available solutions:
MS SERIES – single stage – single impeller
Compact Execution MOR
Capacity up to 1022 m³/hr (50Hz) / 1234 m³/hr (60Hz)
Max. differential pressure: 500 mbar
Ambient temperature from -15 to +40°C
Two-pole electric motors, insulation class F – Tropicalised and IP55 protection
Singlephase or threephase (Bimetallic thermal protector PTO S01 150°C)
Related products
-
AP series
Centrifugal high-pressure fan – DirecT DRIVEN
APE V= 120 ÷ 2.100 m3/h Pt = 190 ÷ 1.475 kg/m2
APF V= 600 ÷ 8.400 m3/h Pt = 430 ÷ 1.760 kg/m2
APG V= 960 ÷ 21.300 m3/h Pt = 390 ÷ 1.865 kg/m2
-
LOW pressure centrifugal fan – Impeller with blades curved forward – Directly coupled motor
BP V=180 ÷ 20.100 m3/h Pt = 15 ÷ 220 kg/m2
Use: for the removal of clean or slightly dusty air.
They have high efficiency and reduced noise level, the fans of this series are largely used, inventilation, conditioning, drying, cooling, mechnical draft, and toxic gas elimination plants. The temperature of the fluid transported must not exceed 80°C without cooling fan and 150° C with cooling fan. For higher temperatures it is necessary to modify the construction of the fan.
-
The low profile of the MIXVENT-TD fans makes them the most effective solution for installations where the space of installation is limited such as false ceilings.
Easy to mount.
TD-MIXVENT
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (till 800 model) or with metal casing steel finished in a tough epoxy-polyester paint coating (for models 1000 to 6000).
The unique design of the support bracket allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting.
-
CENTRIFUGAL DOUBLE INLET FANS
This series is used in restaurants, factories, kitchens,( exhaust hoods) etc.
Low pressure centrifugal fans, with double inlet and forward curved blades impelle, dynamically balanced. Belt driven (NT, RTC, RTCE) and direct driven (DA/CBM), made of galvanized sheet steel.
Motors:
Single phase 230V- 50Hz 4/6 poles IP20 or IP44 ,one speed or three speed
Three phase 230/400V -50Hz 4/6/8 poles
