Electric and automatic steam generator, available steam production from 15 to 60 kW. Water feed can be connected directly to the water mains or to a condensate tank. D01 is supplied with two separate sets of heating elements for single or double operation. Steam working pressure is between 0.5 to 7 bar.
Options
By completing the quote form, you can request our team of sales experts to contact you.
Technical Specifications
Voltage: 230V/400V/3/50-60 Hz
Steam working pressure: 0,3 ÷ 7 bar
Boiler capacity: 55 l
Pump motor: 0.55 kW
Steam tap height: 510 mm
Condensate recovery: 300 mm
Overall dimensions: 830x830x570 mm
Net weight: 114 Kg
Gross weight (carton-pallet): 131 Kg
Packing dimensions: 900x900x820 mm
Shield Series, 3-pass steam generator with fire smoke tube offers comfortable and highly efficient combustion performance with low back pressure values. With its 3-pass design, the combustion surface is used in the most efficient way by ensuring that the flame smoke contacts the entire combustion surface. Heat loss is prevented thanks to strong insulation with glass wool, rock wool and ceramic.
The Mega Volt Series electric steam generator operates in 2-3-4-5-6 stages, depending on its capacity, and works fully automatically. It produces as much steam as you need. The steam is consistent. Therefore, it is not affected by sudden steam draws. Heating resistors are not damaged in sudden needs. Thanks to its steam coupling with a special separator, it is possible to obtain steam purified from water. It has been designed considering all potential adverse conditions and is equipped with exceptional safety chains. Thus, there is no need for a separate operator. It is shipped with all its fittings.
Options
• Water pump
• Water feeding tank
• Steam gun
• Steam-air gunTechnical Specifications SUPER
Voltage 230V/400V/3/50-60 Hz
Steam working pressure 2,8 bar
Boiler heater 3,3 – 3,9 – 4,8 kW
Iron heater 0,830 kW
Boiler capacity 4,9 l
Water inlet 3/8”
Boiler exhaust 3/8”
Overall dimensions 390 x 550 x 1000 mm
Net weight 52 Kg
Gross weight (carton pallet) 61 Kg
Packing dimensions 680 x 480 x 1170 mm
Automatic electric hot steam-generator | compact pre-installed system on the frame.
The compact system includes the steam generator, the water treatment set, electric switchbox and all pipe & electric connections. All is preinstalled on the stainless steel frame. Ready to plug and use.
Automatic electric hot steam-generator / steam pressure from 2 to 6 bar
Water feed can be connected directly to the water mains or to a condensate tank. Regulation of the working steam pressure is adjustable in range from 1 to 4.5 bar.
This steam-generator is available with four independent heaters (four independent heating elements). The steam-generator shell is manufactured in accordance to the current PED regulations.
Recommended usage :
